1.4 CYLINDER BLOCK NOTICE: To prevent cylinder liner damage, never use a hammer or other unsuitable device to remove the cylinder liner. 3. Remove the cylinder liner, using the cylinder liner removal tool, (J–45876). See Figure 1-14. [a] Clean and wipe out the inside of the cylinder liner of any oil or coolant. [b] Install the cylinder liner removal tool in the cylinder liner to be removed with bridge resting on deck of cylinder block and lip of tool resting on the top of the cylinder liner. See Figure 1-14. [c] Tighten the lower nut to expand the tool in the cylinder liner. See Figure 1-14. [d] Tighten the upper nut on the tool until the cylinder liner is pulled from the cylinder block.
Remove the cylinder liner and tool. See Figure 1-14. [e] Remove the tool from the cylinder liner. 1. Lower Nut 3. Upper Nut 2. Resting Bridge Figure 1-14 Cylinder Liner Removal Tool J-45876 All information subject to change without notice. 1-22 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION