EPA07 MBE 4000 SERVICE MANUAL 4. Remove the shim from the block counterbore. See Figure 1-15. 1. Collar Seat Insert (shim) 4. Liner Seat D-Ring 2. Cylinder Block A. Specified in Measuring Cylinder Liner Protrusion Table 3. Cylinder Liner Figure 1-15 Cylinder Liner Seat 5. Remove and discard the two O-rings from the block. See Figure 1-16. 1. Collar Seat Insert (shim) 5. Upper O-ring 2. Block 6. Lower O-ring 3. Cylinder Liner A. Specified in Measuring Cylinder Liner Protrusion Table 4. Liner D-Ring Figure 1-16 Cylinder Liner O-rings All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 1-23