Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

1.4 CYLINDER BLOCK 6. Clean the cylinder block sealing areas and inspect for corrosion. 7. Check the condition of the cylinder liner collar seat. Ensure that the depth of the collar seat is within the specifications listed in Table 1-7. Table 1-7 Cylinder Liner Installation Tolerances 8. Looking for rust or corrosion, check the condition of the cylinder liner collar seat, listed in Table 1-8. Table 1-8 Cylinder Liner Inspection Tolerances All information subject to change without notice. 1-24 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION Description Dimensions: mm (in.) Cylinder Liner Protrusion, From Block, see Figure 1-15, Ref. A.

0.230–0.330 (0.0090–0.0130) Height of the Cylinder Liner Collar, see Figure 1-15 10.10–10.12 (0.3976–0.3984) Depth of the Collar Seat, see Figure 1-15 9.950–10.010 (0.3917–0.3941) Thickness of the Seat Insert 0.14–0.16 (0.0055–0.0063) Description Dimensions: mm (in.) Admissible Out-of-Round of the Cylinder Liner, where it contacts the O-rings Max.: 0.02 (0.0008) Admissible Deformation of the Cylinder Liner Collar, at the Contact Surface with the Seat Insert Max.: 0.02 (0.0008) Admissible Deformation of the Cylinder Liner Collar Seat, at the Contact Surface with the Seat Insert Max.: 0.03 (0.0012)