12.2 STARTING THE ENGINE 12.2 STARTING THE ENGINE Before operating the engine, do the work described under "Preparation for a First Time Start." Start the engine as follows: NOTICE: Never attempt to start any Mercedes-Benz electronic engine using ether or any other starting fluid. Serious engine damage could result. NOTE: As a safety function, the electronic engine control system allows the engine to start only if the transmission is in neutral. PERSONAL INJURY To avoid injury when working near or on an operating engine, remove loose items of clothing and jewelry. Tie back or contain long hair that could be caught in any moving part causing injury. 1. Turn on the ignition switch. 2.
With the accelerator pedal in the idle position, start the engine. 3. Check the engine for leaks. [a] Check all hoses, hose clamps, and pipe unions on the engine for tightness. Shut down the engine and tighten them if necessary. [b] Check the oil feed and return lines at the turbocharger for tightness. Shut down the engine and tighten them if necessary. 4. Shut down the engine. 5. Approximately five minutes after shutdown, check the engine oil level. If necessary, add oil up to the maximum fill level on the oil dipstick. 6. Check all the mounting fasteners on the engine for tightness. All information subject to change without notice.
12-8 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION