1.4 CYLINDER BLOCK 5. Block the air compressor coolant inlet and outlet from the engine block with the special plugs and copper washers as supplied in the leak test kit (J–45982). See Figure 1-28. 1. Coolant Line to Air Compressor 2. Air Compressor Outlet location from Engine Block Figure 1-28 Blocking Air Compressor Inlet / Outlet from Engine Block 6. Install the pressure gauge assembly (pressure gauge, pressure regulator, and shut off valve) from kit (J–45982).See Figure 1-29. 1. Pressure Gauge Assembly Figure 1-29 Pressure Gauge Assembly 7. Connect a compressed air supply to the pressure gauge assembly. See Figure 1-29. All information subject to change without notice.
1-34 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION