Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 4. Install a new seat insert, clean and dry, into the block counterbore. See Figure 1-33. 5. Apply a light coating of engine oil to the lower part of the cylinder liner, from where it contacts the O-rings up to the bevelled area. 6. When installing a new cylinder liner, make sure that the diameter tolerance code corresponds to the one marked on the piston. See Figure 1-34 for the location of tolerance codes. 1. Piston 2. Cylinder Liner Figure 1-34 Tolerance Codes [a] Cylinder liners with tolerance code A require a piston of code BA. [b] Cylinder liners with tolerance code B require a piston of either code BA or BC.

[c] Cylinder liners with tolerance code C require a piston of code BC. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 1-39