1.6 ENGINE BRAKE 4. From the bottom of the cylinder head, insert a suitable spacer about 6.0 mm (1/4 in.) in height. See Figure 1-40. 1. End Cover 7. Spring 2. O-ring 8. Spring Guide 3. Piston 9. Valve Stem Seal 4. Piston Seal 10. Valve 5. Valve Keepers 11. Spacer 6. Spring Retainer Figure 1-40 Cutaway View of Constant Throttle Valve 5. Using needle-nose pliers, remove the piston. Pull the piston and piston seal out of the valve bore. See Figure 1-41. 1. Needle-Nose Pliers 2. Piston Figure 1-41 Piston All information subject to change without notice. 1-46 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION