Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 2. Disconnect the harness connector at the CTV solenoid. 1. EPV Harness Connector 2. Wiring Harness Bracket Figure 1-43 Harness Bracket 3. Remove the bolt securing the wiring harness bracket and remove the bracket.See Figure 1-43. 4. Disconnect the harness connector from the EPV solenoid. See Figure 1-43. 5. Disconnect the harness connector from the and Oil Pressure/Temperature sensor oil filter. 6. Remove the plastic ties securing the harness to the brackets. 7. Pull the harness to the front of the engine through the opening between the oil filter housing and engine. Figure 1-44 CTV Solenoid All information subject to change without notice.

DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 1-49