MAN — DDC-SVC-MAN-0056 - MBE4000 Safe Operation and Preventative Maintenance Manual

MAINTENANCE Figure 27 Engine Oil Temperature Ranges Figure 28 Oil Filter Cap To ensure the engine is protected and the oil stays clean until the next oil change, use only oils of API classification CI-4. FIRE To avoid injury from fire, keep open flames, sparks, electrical resistance heating elements, or other potential ignition sources away when draining lubrication oil. Do not smoke when draining lubricating oil. Drain oil as follows: 1. Chock the tires, place the transmission in neutral, and set the parking brake. NOTE: Change the engine oil only when the engine is at a temperature of approximately 60°C (140°F). 3. Drain the oil.

[a] Place a suitable receptacle beneath the oil drain plug on the underside of the oil pan. 2. Using a 36-mm socket, unscrew the oil filter cap (see Figure 28). [b] Carefully unscrew the oil drain plug on the oil pan and allow the oil to drain out (see Figure 29). 78 All information subject to change without notice. (Rev. 04/08) DDC-SVC-MAN-0056 04/08 Copyright © 2008 DETROIT DIESEL CORPORATION