Komatsu — STARTING ENGINE

MACHINE OPERATIONS AND CONTROLS OPERATION 3. Turn the key in starting switch (3) to the START position. The engine will start. 4. When the engine starts, release the key in starting switch (3). The key will return automatically to the ON position. 5. Even after the engine is started, do not touch the work equipment control levers or the travel pedals, while the engine hydraulic pressure monitor lamp is still lighted. NOTICE If the engine oil pressure monitor does not go out even after 4 to 5 seconds have passed, stop the engine immedi- ately. Check the oil level, check for leakage of oil, and take the necessary action.

STARTING ENGINE IN COLD WEATHER Check that there are no persons or obstacles in the surrounding area, then sound the horn and start the engine. Never use starting aid fluids. They may cause explo- sions. NOTICE Before starting the engine, check that fuel control dial (2) is at the low idling (MIN) position. Do not keep the starting motor rotating continuously for more than 20 seconds. If the engine fails to start, wait for about 2 minutes and repeat from Step 2. If the fuel control dial is at the FULL position, the engine will accelerate suddenly and cause damage to the engine parts, so set it to an intermediate or low speed position. 140 WARNING