Komatsu — STARTING ENGINE

OPERATION MACHINE OPERATIONS AND CONTROLS When starting in low temperatures, do as follows. 1. Check that safety lock lever (1) is in the LOCK position. If it is in the FREE position, the engine cannot be started. Free Lock 2. Set fuel control dial (2) at a low idling (MIN) position. Do not set fuel control dial (2) at the high idling (MAX) position. MIN Low idling 3. Hold the key in starting switch (3) at the HEAT position, and check that preheating monitor (4) lights up. After about 18 seconds, preheating monitor lamp (4) will flash to indicate that preheating is finished. REMARK The monitors and gauges will also light up when the key is turned to the HEAT position. This is normal.

If the temperature is low, the monitor screen may become dark or it may take time for the display to appear. This is normal. 4. When preheating monitor (4) goes out, turn the key in starting switch (3) to the START position to start the engine. 141