Komatsu — AFTER STARTING ENGINE

OPERATION MACHINE OPERATIONS AND CONTROLS AFTER STARTING ENGINE Emergency stop If there has been any abnormal actuation or trouble, turn the starting switch key to the OFF position. If the work equipment is operated without sufficiently warming up the machine, the response of the work equipment to the movement of the control lever will be slow, and the work equipment may not move as the operator desires. Always, fully warm up the machine. Particularly in cold areas, be sure to carry out the warming-up operation fully. BREAKING-IN THE NEW MACHINE CAUTION Your Komatsu machine has been thoroughly adjusted and tested before shipment.

However, operating the machine under severe conditions at the beginning can adversely affect the performance and shorten the machine life. Be sure to break-in the machine for the initial 100 hours (as indicated by the service meter). During break-in operations, follow the precautions described in this manual. Idle the engine for 5 minutes after starting it up. Avoid operation with heavy loads or at high speeds. Avoid sudden starts, sudden acceleration, sudden steering and sudden stops except in cases of emergency. 143 WARNING