MAINTENANCE MAINTENANCE PROCEDURE CHECK AND TIGHTEN TRACK SHOE BOLTS If the machine is used with loose track shoe bolts (1), they will break, so tighten any loose bolts immediately. Method for tightening Track shoe 1. First tighten to a torque of 196 ± 20 N•m (20 ± 2 kgf•m) then check that the nut and shoe are in close contact with the link contact surface. 2. After checking, tighten further 120є ± 10є. Road liner 1. Tighten to a torque of 440 ± 50 N•m (45 ± 5 kgf•m). After tightening, check that the nut and shoe are in close contact with the link contact surface. Order for tightening Tighten the bolts in the order shown in the diagram on the right.
After tightening, check that the nut and shoe are in close con- tact with the link mating surface. AD053090 235