Komatsu — INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)

MAINTENANCE PROCEDURE MAINTENANCE 10. Install the bottom cover. 11. Add water through the water filler up to the filler port. 12. Run the engine idle at a low speed for 5 minutes, then at a high speed for 5 minutes to bleed air mixed in the cool- ing water. (At this time, keep the water filler cap removed.) 13. After draining off the cooling water of reserve tank (4), clean the inside of the reserve tank and refill the water between FULL and LOW level. 9JH02644A 14. Stop the engine and tighten the cap. Check the coolant level, and add water if the level is low 234