Komatsu — INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)

MAINTENANCE PROCEDURE MAINTENANCE CHECK AND ADJUST AIR CONDITIONER (IF EQUIPPED) CHECK LEVEL OF REFRIGERANT (GAS) If the refrigerant used in the cooler gets into your eyes or on your hands, it may cause loss of sight or frostbite. Do not touch the refrigerant. Never loosen any part of the refrigerant circuit. Do not bring any flame close to any point where the refrig- erant gas is leaking. If there is a lack of refrigerant (Freon 134a), the cooling perfor- mance will be poor. When operating the cooler at high speed, there should be no bubbles in the sight glass (inspection window) mounted on the condenser unit receiver. Sight glass A A: No bubbles in refrigerant flow: Correct B:

Bubbles in refrigerant flow (bubbles continuously pass through): Refrigerant level low B C C: Colorless, transparent: No refrigerant REMARK When there are bubbles, the refrigerant gas level is low, so contact your refrigerant dealer to have refrigerant added. If the air conditioner is run with the refrigerant gas level low, it will cause damage to the compressor. Receiver AW35793C Check in off-season When not being used for a long period, operate the cooler for 3 to 5 minutes once a month to supply lubricant to each component of the compressor.

Inspection and maintenance items list for cooler 242 WARNING Inspection and maintenance items Contents Maintenance Refrigerant (gas) Filling quantity Twice a year; and autumn Condenser Clogging of fin Every 500 hou Compressor Function Every 4000 ho V belt Damage and tension Every 250 hou Blower motor and fan Function (Check for abnormal sound) When require Control mechanism Function (Check for normal function) When require Piping for connection Installation condition looseness of tightening connection portions gas leakage, damage When require