Komatsu — OPERATION

MACHINES READY FOR ATTACHMENTS ATTACHMENTS AND OPTIONS OPERATION Do not rest a foot on the pedal and depress it, when the auto deceleration switch is in ON position. The engine speed rises all of sudden and the attachment will move suddenly and cause serious dam- age or injury. Do not put your foot on the pedal except when operating the pedal. If you rest your foot on the pedal during operations, and it is depressed by accident, the attachment may move suddenly and cause serious damage or injury. The operation of the attachment is as follows.

When the B mode control switch is ON and the lock pin position makes only the front of the pedal free, if the front of the pedal is depressed, the breaker is actuated. 1. Set the working mode to B mode. Only the front of the pedal free 2. When select switch (1) on the monitor is pressed, the screen changes to screen (A). Select a suitable oil flow for the breaker from among 180 liters/min, 140 liters/min, and 100 liters/min, then press input confirmation switch (2). 3. The monitor screen changes to screen (B), so if it is nec- essary to make fine adjustment, press up switch (3) or down switch (4) to move the bar graph showing the oil flow up or down, then press input confirmation switch (2).

It is possible to change the oil flow in segments of approx. 10 liters/min. If fine adjustment is not necessary, simply press input confirmation switch (2). The default setting is 230 liters/min. Even if the starting switch is turned OFF, the set oil flow when the engine is next started will be the value set by the above procedure. Precautions when using Check that the stop valve is at the FREE position. Check that the working mode is B mode. For details of the path of the oil, see "HYDRAULIC CIRCUIT (PAGE 289)". When considering whether it is necessary to install an accumulator for the attachment circuit, contact the attachment manufacturer and then decide.

For other precautions when handling the breaker, follow the instruction manual from the breaker manu- facturer and use the breaker correctly. 230 01 1 min min min 1 1 190 150 02 03 02 N0. 294 WARNING