Komatsu — BASIC CHECK ITEMS

OPERATION EXPLANATION OF COMPONENTS FUEL GAUGE This meter (9) displays the level of fuel in the fuel tank. During operations, the indicator should be in the black range. If the indicator enters red range (A) during operations, there are less than 100 liters of fuel remaining in the tank, so check and add fuel. REMARK If the indicator enters red range (B), there are less than 41 liters of fuel remaining. Red range Black range When the indicator is in the red range (A) to (B), fuel level mon- itor (1) lights up red. The correct fuel may not be displayed for a short time when the starting switch is turned ON, but this is not an abnormality.

HYDRAULIC OIL TEMPERATURE GAUGE This meter (10) displays the hydraulic oil temperature. During operations, the indicator should be in the black range. If the indicator enters red range (A) during operations, the hydraulic oil temperature has gone above 102°C. Stop the engine or run it at low idle and wait for the hydraulic oil temper- ature to go down. Red range Black range REMARK When the indicator is in the red range (A) to (B), the hydraulic oil temperature is as follows. Red range position (A) : More than 102°C Red range position (B) : More than 105°C When the indicator is in the red range (A) to (B), hydraulic oil temperature monitor (1) lights up red.

If the indicator is at position (C) when the engine is started, the hydraulic oil temperature is more than 25°C, and hydraulic oil temperature monitor (1) lights up white. In this case, carry out the warming-up operation. For details, see "WARMING-UP OPERATION (PAGE 144)". SERVICE METER This monitor (11) displays the total time that the machine has been operated. Use the time display to set the maintenance interval. When the starting switch is ON, the service meter advances even if the machine is not moving. The service meter advances by 1 for every hour of operation, regardless of the engine speed. 75