Komatsu — METHOD OF TOWING MACHINE

. OPERATION TROUBLESHOOTING can be operated, and the engine is running, it is possible to tow the EMERGENCY TRAVEL OPERATION a failure in the electrical NOTICE 3 - 125 When towi ng a machine downhill, it ma y be necessary to connect another machine to the rear of the machine being towe d in order to provide ample ri mpull and braking power. This makes it possib le to prevent the machine from losing control. y be carried out under vario us differing conditions, so it is impossible to determine beforehand the Towing ma requireme nts for towing.

Towing on flat horizontal roads will require the minimum rimpu ll, while towing on slopes o r on unev en road surfaces will require t Connect a diagram at WHEN ENGINE CAN BE USED If the transmission and steering wheel If the trans machine o ut of mud or to move it for a s The operat is towed. WHEN ENGINE CANNOT BE USED opped, use the following procedure. When towing a machine with the engine st 1. 2. 3. 1. The trans fer oil does not lubricate the s ystem, so remove the front and rear drive shaft s. If necessary, block the tires to pr event the machine from movi ng. move the steering cylinder. 2.

The steer ing cannot be operated, so re Even if th e brakes are in good conditio n, the brakes can only be used a limited num ber of times. There is no change in the operating force for the brake pedal, but the braking force is reduced each time the pedal is d. depresse 3. Connect t he towing equipment securely . When carrying out towing operations, use tw o machines of at least the same cla ss as the machine being towe d. Connect one machine each to the front and rear of the machine being towed, th en remove the blocks from th e tires and tow the machine.

The normal g ear shifting operation is carri system and t he machine does not move, p lease contact your Komatsu distributor to hav Always reques t your Komatsu distributor to car