Isuzu — Isuzu N Series Training Manual

PROBLEM POSSIBLE CAUSE CORRECTION Brakes Chatter 1. Incorrect lining/pad to drum/disc clear- ance. 2. Loose mounting plate. 3. Grease, fluid, road dust on the lining pad. 4. Weak or broken return spring. 5. Loose wheel bearings. 6. Drums out-of-round. 7. Discs warped. 8. Cocked or distorted shoes. 9. Distorted, tapered, or barrel- shaped drums. 10. Incorrect lining/pad material. 11. Linings/pads worn out. 12. Lining loose on the shoes. 13. Foreign material imbedded in the lin- ings/pads. 14. Cracked or threaded drums/discs. 1. Adjust to specification. 2. Tighten securely. 3. Clean or reline. 4. Replace the return spring. 5. Readjust. 6. Machine the drums in axle sets. 7.

Machine the discs in axle sets. 8. Straighten or replace. 9. Machine drums in pairs. Replace if nec- essary. 10. Reline with correct linings/pads. 11. Reline the brake. 12. Rerivet the linings to the shoes. Replace if necessary. Check for dam- aged or distorted shoes. 13. Replace the linings/pads in axle sets. 14. Replace in axle pairs. Shoe Click 1. Return spring weak. 2. Shoe bent. 1. Replace the spring. 2. Straighten or replace. Noise and Chatter Squealing, clicking, or scraping sound upon brake application 1. Bent, damaged or incorrect shoes. 2. Worn out lining/pad. 3. Foreign material embedded in the lin- ing/pad. 4. Broken shoe return spring. 5.

Cracked or threaded drums/discs (lathe marks). 1. Replace with the correct shoes and lin- ing. Always replace in axle sets. 2. Replace the shoes and lining/pad in axle sets. 3. Replace the shoes and lining/pad in axle sets. 4. Replace the return spring. 5. Replace the drums/discs in axle sets. Pulls to One Side 1. Grease or fluid soaked lining/pad. 2. Loose wheel bearings, loose (or distort- ed) mounting plate on the rear or front axle or loose spring bolts. 3. Linings/pads not of the recommended kind. 4. Tires not properly or evenly inflated or unequal wear of tread. Different tread non-skid design. 5. Water, mud, etc., in the brakes. 1. Replace in axle sets. 2.

Adjust the wheel bearing, tighten (or re- place) the mounting plate to the axle and tighten the spring bolts. 3. Install recommended linings/pads. Install the shoes correctly. 4. Inflate the tires to recommended pres- sures. Rearrange the tires so that a pair of non-skid tread surfaces of similar de- sign and equal wear will be installed on the front wheels, and an other pair with like tread will be installed on the rear wheels. 5. Remove any foreign material from all of the brake parts and inside of the drums.