Brake Drum Exhaust Brake PROBLEM POSSIBLE CAUSE CORRECTION Brake Drum Heat Checked in Spots 1. Out-of-round brake drum. 2. Eccentric mounting of the drum. 3. Loose wheel bearing. 1-3. Repair or replace as required. Drum Uniformly Heat Checked 1. Improper friction materials. 2. Overworked brake. 3. Driver abuse. 1-3. Repair or replace as required. Excessive Scoring of the Drum 1. Improper friction materials. 2. Overworked brake. 3. Abrasive material between the lining and drum. 4. Soft drum. 5. Bent or warped shoe. 1-5. Repair or replace as required. Excessive Drum Cracks 1. Drive abuse. 2. Weak drum. 3. Wrong friction material. 4. Overworked brake. 1-4. Repair or replace as required.
PROBLEM POSSIBLE CAUSE CORRECTION Exhaust Brake does not Operate 1. Blown fuse. 2. Improperly adjusted or faulty accelera- tor or clutch switches. 3. Poor connections or corroded terminals at switches or control valve. 4. Improperly adjusted or seized exhaust brake valve. 5. Vacuum lines kinked, restricted, or plugged with ice. 6. Seized vacuum chamber. 7. Valve linkage broken. 8. Chamber or control valve jammed with ice. 9. Faulty control valve. Valve should open when approximate battery(s) voltage is applied to terminals. 10. Faulty vacuum chamber. 11. Broken wire in wiring harness. 1. Replace. 2. Adjust or replace. 3. Clean or replace. 4. Adjust, or repair. 5. Repair. 6. Repair. 7.
Repair. 8. Melt ice and drain lines of water. 9. Replace. 10. Replace. 11. Repair. Exhaust Brake SIow to Operate 1. Tighten exhaust brake valve or linkage. 2. Improperly adjusted accelerator or clutch switches. 1. Free up and lubricate. 2. Adjust.