Notice: As vacuum booster (Master Vac) is undetachable type, it should be replaced as an assembly if it does not work well. Be sure to adjust the stop light switch. N5A0004E 3. Turn the adjuster gear so that the difference be- tween the internal diameter of the brake drum and the external diameter of the brake shoe becomes 0.6 mm (0.024 in). 4. Step on the brake hard while turning the brake drum in the forward direction, or while driving for- ward. Brake Pedal Free Play and Allowance Standard value 1. Free play: 4 to 7 mm (0.16 to 0.28 in) 24 to 29 mm (0.94 to 1.14 in) for HBB type N5A0006E Brake Pedal Adjustment Brake Pedal Height and Free Play Adjustment Vacuum Booster (Master Vac) Type:
The height of push rod should be adjusted so that the distance from its master cylinder mounting surface to end measures 18.2 mm (0.717 in). (When depressed with force of the 490 N (50 kg / 110 lbs).) N5A0005E For push rod length adjustment, the distance from the center of crevis pin hole to brake pedal bracket mount- ing surface should be set at 109 mm (4.291 in); without spacer, 129 mm (5.079 in); with spacer. When fixed under this condition, there is no need to ad- just the height of brake pedal from floor and free play. (When depressed with force of the 294 N (30 kg / 66 lbs).) 2.
Allowance mm (in) NHR Front Drum Brake 50 (1.97) NKR Front Disc Brake Model 40 (1.57) Front Drum Brake Model Less than GVM 6.5 ton 60 (2.36) GVM 6.5 ton 40 (1.57) NPR NQR Front Disc Brake Model 40 (1.57) Front Drum Brake Model Less than GVM 6.5 ton 60 (2.36) GVM 6.5 ton or more 40 (1.57) NPS Front Drum Brake 40 (1.57) NPR, NQR (HBB type) Front Disc Brake Model 35 (1.38) Front Drum Brake Model 45 (1.77)