4. Disassembly, Inspection and Reassembly of Engines (c) If the limit is exceeded or any surface defect is found, repair by boring and honing. Use an oversized piston (and new piston rings) as required. Oversized piston (0.25 mm, with piston rings) Piston ring assy for oversized (0.25mm) Cylinder dimension after boring and honing 96 Model Code No. Standard (mm) 3TNV82A 719802-22900 82.250 3TNV84(T) 4TNV84 129004-22900 84.250 4TNV84T 129508-22900 84.250 3/4TNV88 129005-22900 88.250 4TNV94L 729906-22900 94.250 4TNV98 129902-22700 98.250 4TNV106 729907-22900 106.250 4TNV106T 723907-22910 106.250 Model Piston ring code No.
3TNV82A 719802-22950 3TNV84(T) 4TNV84 129004-22950 4TNV84T 129004-22950 3/4TNV88 129005-22950 4TNV94L 729906-22950 4TNV98 729907-22950 4TNV106(T) 723907-22950 Model Cylinder dimension (mm) Honing angle (deg.) Surface roughness Roundness/Cylindricity (mm) 3TNV82A 82.250 82.280 30 40 deg. R max 1.0 3.5S 0.01 or less 3TNV84(T) 4TNV84 84.250 84.280 3/4TNV88 88.250 88.280 4TNV94L 94.250 94.280 4TNV98 98.250 98.280 4TNV106(T) 106.250 106.280