2. Inspection and Adjustment 7) Adjust the injection angle difference, calculated in the above 5), at 0.25 in the unit in the installation angle of the fuel pump while reading the mark (minimum 0.5 and cam angle) of the adjustment sticker. [NOTICE] Push down the fuel pump in the outside direction of the cylinder block at +1 degree when a injection angle difference is +1 degree. And, push it down to the cylinder block side when a difference is –1 degree. 8) Tighten the fuel pump installation nuts. (Supplementary explanation 1) The installation angle of the fuel pump is as follows.
(Supplementary explanation 2) When fuel injection timing is advanced or delayed, the installation angle of the fuel pump is adjusted. When fuel injection timing is advanced for example at 2 degrees, loosen the nuts, which fix the fuel pump on the gear case, and turn the fuel pump body in the outside direction of the cylinder block at 1 degree, and tighten the pump installation nuts. And, when fuel injection timing is delayed, a pump is turned in that reverse direction. 48 Model Installation angle (deg.) 3TNV82A TNV88 25 4TNV94L/98/106(T) 13 4TNV106(T) 11.5