2. Inspection and Adjustment 2.3 Adjusting the no-load maximum or minimum speed 1) After warming the engine up, gradually raise the speed and set it at the no-load maximum revolution. 2) If the no-load maximum revolution is out of the standard, adjust it by turning the high idle limiting bolt. 3) Then set the no-load minimum speed by adjusting the low idle limiting bolt. Standards (Unit: min -1 ) Note) The engine speed may differ from the above standard depending on an engine installed on a machine unit.
49 Engine application class Rating speed No-load maximum No-load minimum CL 1500 1575-1625 1200 or more 1800 1870-1920 VM 2000 2180-2230 800 or more (1100 or more for 4TNV106(T) ) 2200 2395-2445 2400 2590-2640 2500 2700-2750 2600 2785-2835 2800 2970-3020 3000 3185-3235