4 Gauges 6LY3, 6CX, SY GEN III, alternate BY2 Unlimited Note: Tank numbers and designations may vary in a numerous ways. The key is to match the instance number of the device sending the data from a sender to the CAN Bus with the gauge that will receive the data. The highlighted example in the table (previous page) shows that a fuel sender connected into the starboard engine interface will be assigned instance 1 and the auxiliary 1 fuel level gauge will read instance 1. Thus auxiliary 1 gauge will read the starboard tank. Primary, Auxiliary 1, Auxiliary 2, and Auxiliary 3 Fuel Gauges all have different part numbers.
Fuel Gauge Box Labels Yanmar Fuel Gauge Boxes are marked with a label that shows Yanmar Gauge Designation and NMEA 2000 ® instance designation. © 2011 Yanmar Marine International • Rev. 2.0 4:26 Yanmar Electronic Control Systems Technical Manual Yanmar Gauge Designation NMEA 2000® Instance Primary Tank 1 0 Aux 1 Tank 2 1 Aux 2 Tank 3 2 Aux 3 Tank 4 3