Yanmar — Yanmar Electronic Control System Technical Manual for Classic, BY2, 6LY3, 6CX, and SY GEN III Series Engines

15 Troubleshooting When Items in Table 1 indicate a communications problem, use this table for additional information. If it appears a communication problem exists, refer to the “CAN Bus Check and Diagnostics,” later in this section. When items in Table 1 indicate an individual component or non-electronic control system problem, use this table to trace the problem. Problems with individual components are covered in “Individual Components” later in this section, or in the specific engine manual. © 2011 Yanmar Marine International • Rev.

2.0 Yanmar Electronic Control Systems Technical Manual 15:5 TABLE 3 - Communication Problems Problem Cause Reason/Solution Most or all units ON but no data or other activity. No CAN Bus communications. Use i5601E or other tool to check CAN Bus. See “CAN Bus Check and Diagnostics” later in this section. No lights on Control Head • No CAN Bus power. • Engine interface not connected or misconnected. • Press SELECT button. If green LED flashes, head has power. • Check communication to engine interface using the i5601E. Specific Alarm Messages on a unit. Out of spec condition. Check for possible details about message in this, the installation, and/ or engine manuals.

Flashing lights on Control Head. Critical or non-critical control failure. See “Control Head Alarms” in “Individual Components” later in this section. i5601E Display turns on, but shows dashes instead of data No data on CAN Bus. • See i5601 “Network Status Screen” later in this section. • 6LY3, 6CX and SY GEN III check CAN Bus indicator light at engine interface TABLE 4 - Non-Electronic Control Problems Problem Cause Reason/Solution Specific Alarm Messages on a unit. Out of spec condition. Check for possible details about message in this, the installation, and/ or engine manuals. Flashing lights on Control Head. Critical or non-critical control failure.

See “Control Head Alarms” in “Individual Components” later in this section. i5601E Display showing detailed engine alarm. Valid alarm. See DTC (Diagnostic Trouble Codes) in the specific engine manual.