SEBU8598 41 Engine Operation Fuel Conservation Practices 2. Engage the driven equipment without a load on the equipment, when possible. Observe the service indicator for the air cleaner frequently, if equipped. Keep the air cleaner elements clean. Interrupted starts put excessive stress on the drive train. Interrupted starts also waste fuel. To get the driven equipment in motion, engage the clutch smoothly with no load on the equipment. This method should produce a start that is smooth and easy. The engine rpm should not increase and the clutch should not slip. Do not remove the cover for the air cleaner unless the air filter service indicator indicates the need for cleaning of the filter.
Maintain a good electrical system. 3. Ensure that the ranges of the gauges are normal when the engine is operating at one-half of the rated rpm. Ensure that all gauges operate properly. One bad battery cell will overwork the alternator. This will consume excess power and excess fuel. Ensure that the belts are properly adjusted. The belts should be in good condition. 4. Increase the engine rpm to the rated rpm. Always increase the engine rpm to the rated rpm before the load is applied. Ensure that all of the connections of the hoses are tight. The connections should not leak. Ensure that the driven equipment is in good working order. 5. Apply the load. Begin operating the engine at low load.
Check the gauges and equipment for proper operation. After normal oil pressure is reached and the temperature gauge begins to move, the engine may be operated at full load. Check the gauges and equipment frequently when the engine is operated under load. Cold engines consume excess fuel. Keep cooling system components clean and keep cooling system components in good repair. Never operate the engine without water temperature regulators. All of these items will help maintain operating temperatures. Extended operation at low idle or at reduced load may cause increased oil consumption and carbon buildup in the cylinders. This carbon buildup results in a loss of power and/or poor performance.
i05893104 Fuel Conservation Practices SMCS Code: 1000; 1250 The efficiency of the engine can affect the fuel economy. The design and technology used byCaterpillar in manufacturing provides maximum fuel efficiency in all applications. Follow the recommended procedures in order to attain optimum performance for the life of the engine. Avoid spilling fuel. Fuel expands when the fuel is warmed up. The fuel may overflow from the fuel tank. Inspect fuel lines for leaks. Repair the fuel lines, as needed. Be aware of the properties of the different fuels. Use only the recommended fuels. Avoid unnecessary operation at no load.
Shut off the engine instead of operating the engine at no load for long periods of time.