Kaiyi — Kaiyi Power Train System Technical Manual

刲 Bring housing (1) into contact position by means of the Torx screws. This will preload the pistons, and you can remove the cylindrical pins (assembly aid). 1 7609ATM375 刳 Fix housing by means of Torx screws (1). 1 余 Tightening torque (M5/10.9 佴 30) : 0.56 kgf 余 m (4.06 lbf 余 ft ) Reducing adapter 5870 656 056 Socket wrench TX-27 5873 042 002 7609ATM376 刴 Mount pressure controllers with O-ring 13.5 佴 2 (1) and fasten them by means of fixing plates (2) and Torx screws (3). 1 3 2 侍 Install fixing plate, with the claw showing downwards. Pay attention to the radial installation position of pressure controllers, see figure. 余 Tightening torque (M5/8.8 佴 12) :

0.56 kgf 余 m (4.06 lbf 余 ft ) 7609ATM377 Reducing adapter 5870 656 056 Socket wrench TX-27 5873 042 002 Preassemble the opposite side Preassemble the opposite side 刵 The figure on the right shows the following single parts : 1 Main pressure valve (1EA, Piston a. compr.spring) 2 Vibration damper (3EA, Piston a. compr.spring) 3 Follow-on slide (3EA, Piston a. compr.spring) S 1 3 2 7609ATM378 3-194