24. SERVICE PROCEDURE NOTICE If small holes or thinner parts are found on the element when it is checked with an electric bulb after cleaning and drying, replace the element. Do not use an element whose folds or gasket or seal are damaged. When cleaning the element, do not hit it or beat it against something. 4. Set the cleaned element and dust cup. Replacing inner element 1. First remove the cover and the outer element, and then remove the inner element. 2. To prevent dust from getting in, use a clean cloth or tape to cover the air connector (outlet side). 3. Clean the air cleaner body interior, then remove the cover installed in Step 2. 4.
Fit a new inner element to the connector and tighten it with nuts. Do not clean and reinstall a inner element. 5. Install the outer element and the dust cup. 3-30