SECTION 4 OPERATING Page 16 INSTRUMENTS AND CONTROLS 33. A/C CONTROL KNOB Turn the knob to the right for increased cooling, to decrease turn he knob to the left. A machine in the standard configuration is not equipped with A/C. 34. MASTER SWITCH This switch is used to switch heating or A/C on. It has three positions: neutral, heating, A/C. 35. DEFROSTER FAN SWITCH (IF EQUIPPED) This switch is used to control defroster fan speed circulating the air in the cab This switch has three positions: OFF, LO, HI. Place the switch in the desired position. WARNING! Switch off the defroster fan before adjusting the direction of flow to avoid injury. 36.
WINDSHIELD WIPER CONTROL SWITCH This switch controls the speed of the windshield wiper motor,it has three positions: OFF LO HI Place the switch in the desired position. 37. REAR WINDOW WIPERS CONTROL SWITCH (IF EQUIPPED) This switch controls the speed of the rear window wiper motors, it has three positions: OFF, LO, HI. Place the switch in the desired position. 38. WINDSHIELD WASHER SWITCH BUTTON This switch controls the windshield washer. Push the switch button down to activate the washer, release the button to stop the washer. Always activate the washer before switching on wiper not to scratch the windshield. 39.
REAR WINDOW WASHER SWITCH BUTTON (IF EQUIPPED) This switch controls the rear window washer. Push the switch button down to run the washer. Release the button to stop the washer. Always activate the washer before switching on wiper not to scratch the window. 40. AIR CONTROL KNOB This knob is used to control quantity and direction of air (heated or cooled) supplied to the cab. OM560C99/1E DRESSTA