PACCAR 567 — Operate the Windshield Wipers

CONTROLS - Steering Column Controls How to Spray Windshield Washer Fluid This vehicle is equipped with a function to wash the windshield and simultaneously engage the wipers. Operate the Windshield Wipers This vehicle is equipped with a two speed, intermittent windshield wiper system. The windshield wiper system is integrated with the exterior lights so that the low beam headlights will turn on when the windshield wipers turn on. instrument cluster display. Go to Settings > Wiper Interlock and turn this value to OFF. Avoid running the wiper blades over a dry windshield to prevent scratching the glass. Spray on washer fluid first. A scratched windshield will reduce visibility.

A seven-position rotary wiper switch (located on the turn signal lever) operates the windshield wipers and washer. If you need to use the windshield wipers: 1. Rotate the end of the turn signal lever to change the wiper mode from off to on. 2. Rotate the outer knob of the turn stalk lever to adjust the wiper speed. 3 CAUTION If the electric pump is operated for a long period (more than 15 seconds) with a dry reservoir, the pump motor may be damaged. WARNING Clean blades regularly with a damp cloth to remove road film and wax buildup. DO NOT drive with worn or dirty wiper blades.

They can reduce visibility, making driving hazardous which may lead to an accident result- ing in death or personal injury. If you need to use the windshield washer: 1. Push the Turn Signal Lever Outer Knob in. CAUTION DO NOT use antifreeze or engine coolant in the windshield washer res- ervoir, damage to seals and other components will result. Press and hold will activate the washer fluid and wipers. Instant press and release will activate the washer fluid only. Four levels of intermittent speeds Low wiper speed High wiper speed To override this function, turn the headlights on and then off again.

Permanently overriding this functionality is attainable via the Settings Menu in the Y53-6126-1A1 (01/21) 109