MAINTENANCE - Specification Reference Charts Standard Grade 8 UNF or UNC Nylon Lock-Nuts Use only lock-nut with nylon insert. Lubricate nylon insert nut lightly with SAE 20W or 30W oil. Tighten all frame fasteners with a torque wrench. Where fasteners with all-metal lock- nuts are indicated in the following table 5 NOTE The following values are applicable to fasteners on the FRAME and DO NOT APPLY to u-bolts for the suspension.
Y53-6126-1A1 (01/21) 305 Metric Fastener Size (with NYLON insert nuts) Tightening Specification lb-ft (N•m) M5 6-9 (8-12) M6 7-11 (9-15) M8 17-23 (23-31) Tightening Specification lb-ft (N•m) Fastener Size (-in.) 16-22 (22-30) 5/16 30-40 (41-54) 3/8 55-65 (75-88) 7/16 80-90 (109-122) 1/2 115-140 (156-190) 9/16 165-195 (224-265) 5/8 290-340 (394-462) 3/4 380-460 (517-626) 7/8 700-830 (952-1,129) 1 990-1,170 (1,346- 1,591) 1-1/8 1,380-1,630 (1,877- 2,217) 1-1/4 NOTE The torque values and instructions with the following table apply ONLY to all-metal lock nuts (left image) but do NOT apply to Nylon lock-nuts (right im- age).