16. TROUBLESHOOTING 16.1 WHEN MACHINE RUNS OUT OF FUEL WARNING The engine will start, so check carefully that the area around the engine is safe before cranking the engine. If the machine has run out of fuel, add fuel and then bleed the air from the fuel system before starting the engine. PROCEDURE FOR BLEEDING AIR 1. Loosen air bleeding plug 1 . 2. Loosen feed pump knob 2 and move the pump up and down to draw off fuel until air ceases to come out of air bleeding plug 1 . 3. After bleeding the air, tighten air bleeding plug 1 , then push in the knob of feed pump 2 and tighten it.
16.1.2 MAINTENANCE OF AIR CONDITIONER COMPRESSOR When storing the machine for long time (1 month or longer) NOTICE When using the compressor after storing the machine or leaving the air conditioner unused for long time (1 month or longer), warm the inside of the cab to at least 10°C by running the engine idle, then operate the air conditioner at the MAX COOL mode. The following seizure caused by insufficient lubrication in the compressor can be prevented by this operation. If the machine is stored for long time, oil in the compressor is reduced (it flows to another components). 2-105