Komatsu — 24.6 EVERY 250 HOURS SERVICE

24. SERVICE PROCEDURE 24.6.5 CHECK FOR LOOSE WHEEL HUB NUTS, TIGHTEN If wheel hub nuts 1 are loose, tire wear will be increased and accidents may be caused. 1. Check for loose nuts, and tighten if necessary. When checking for loose nuts, always turn the nuts in the direction of tightening to check. Tightening torque: 824 ± 88 N·m (84 ± 9 kgf·m, 607.6 ± 65.1 lbft) 2. If any wheel bolt is broken, replace all bolts for that wheel. 24.6.6 CLEAN ELEMENT IN AIR CONDITIONER RECIRCULATION FILTER (IF EQUIPPED) 1. Open the filter inspection cover, remove the filter cover, then remove the filter in the direction of the arrow.

When removing the filter to the side, put your weight on the seat, and push down. 2. Clean with compressed air in the same way as for the fresh air filter. If the filter is extremely dirty, rinse it in water. After rinsing the filter, dry it completely before installing it again. 24.6.7 CHECK FRAME AND BOOM 1. Wash the frame and boom so that the check can be carried out easily. 2. Check all parts of the frame and boom for damage. In particular, check the colored part in the diagram, and repair if any cracks or other damage are found. For details of the method of repair, please contact your Komatsu distributor. 3-62