JCB — 3.pdf (p.3)

Section C - Electrics Basic System Operation Engine Oil Level Warning Engine Oil Level Warning Operation C049930-1 Fig 33. The oil level float switch is positioned in the side of the engine. When the engine oil level is at an acceptable level, the float switch is closed, applying an earth to the ECU1 i/p 35 (A-3) When the engine oil level drops below the acceptable level, the float switch is opened, removing the earth from the i/p. The i/p is only checked on machine ignition on. The oil level check should occur before other machine or engine faults are raised.

When the EMS receives a CAN message from the ECU1 indicating that the oil level is OK, the EMS displays the message "ENG OIL OK" for 5 seconds. When the EMS receives a CAN message from the ECU1 indicating that the oil level is low, the EMS displays the message "CHK ENG OIL" for 5 seconds and the buzzer sounds for 1.5 seconds. C-30 C-30 9803/9880-3