Section E - Hydraulics Circuit Descriptions 100% Slew Lock 100% Slew Lock For schematic, K Fig 19. ( T E-53) . When the slew lock button is operated in the cab, the ECU1 give two outputs: 1 To the 2 slew shut off solenoids 44 . This puts either side of the slew spool to tank and prevents operation of the circuits. 2 To the CT3 solenoid on the 8 Station solenoid valve 60 , allowing any pressure in the slew brake to drain to tank. 3 The CT1 slew brake solenoid is de-energised as soon as the slew lock button is pressed. Note: The CT3 solenoid is energised either, 5 seconds after the button is operated, or 5 seconds after the slew pressure switch opens, depending on which is last to operate.
This allows the slew to come to a standstill on the cross line relief valves, before the brake is applied. E-52 E-52 9803/9880-3