JCB — 94.pdf (p.94)

Section C - Electrics Basic System Operation Circuit Concepts Circuit Concepts Inputs There are two main types of input, Digital and Analogue. Digital type inputs are on/off type inputs (i.e. switches) and can be Low side inputs or High side inputs. Low side inputs are inputs that provide a ground to the ECU. High side inputs are inputs that provide a positive feed to the ECU. Analogue Inputs are sensor type inputs that provide a varying type input to the ECU, this input could be a resistance or frequency type input. Digital inputs (on/off switch type inputs) C007180GB-2 Fig 10. 1 Low side input. The low side input is the most frequently used input on the A.M.S system.

The low side input can be in the form of rocker switches or pressure switches. C007170GB-2 Fig 9. 2 High side input. The high side input is used on circuits that require a positive feed when the ignition is switched off, i.e. sidelights or hazard lights. The high side input is also used on the engine preheat circuit. C-11 C-11 9803/9880-3