10. Install the back plate in the reverse order of removal. \L 1 LARGE PlplN WASHER Y \WAVE WASHERS SCREWS SCREW 11. Remove the screws, wave washers and set washer. Set the remote control box so that the mounting holes align with the mounting holes in the base. 13. Install the base to the mounting plate (hull) with the screws and nuts. When the mounting plate thickness is less than 20 mm, use the screws, nuts and large plain washers. When 20 mm or more, use the 12. Tightly screw the base to the remote control wooden screws. TORQUE: 5-8 N*m (0.5-0.8 kg-m, 3.6-5.8 ft-lb) box. TORQUE: 3-45 N*m (0.3-0.5 kg-m, 2.2-3.6 ft-lb) 10137 Date of Issue:
June 2003 0 2001-2003 American Honda Motor Co., Inc.