honda — BF8D/BF9.9D

2. BF8DIBF9.9D STEERING CONNECTIONS Do this before final placement of the motor on the transom. Refer to the steering cable manufacturer’s manual for cable handling procedures. PLATE CAP (2) ,(When steering is not used.) cable NU STEERING LINK ROD (marine grease) Tilt-Tube Type STEERING CABLE 46i (marine grease) \ / CAP (2) TILT CAP i U T SEALED CAP 1. Remove the left and right caps from the tilt shaft. 2. If the steering wheel is mounted on the starboard side, insert the steering cable through the hole in the tilt tube on the starboard side and attach the cable with the cap nut. Apply marine grease to the inner and outer cable before installation.

Install the sealed cap to the tilt shaft over the steering cable. 3. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 218