3. BF15DIBF20D STEERING CONNECTIONS Do this before final placement of the motor on the transom. Refer to the steering cable manufacturer’s manual for cable handling procedures. STEERING CABLE NUT CAP (2) (When steering cable RING LINK ROD 3.8-24 UNF BOLT STEERING CABLE (marine grease) Tilt Tube Type CAP (2) STEERING CABLE I - 6 a (marine - / CAP STEER IN^ CABLE NUT 1. Remove the left and right caps from the tilt tube. (marine grease) ASSEMBLY TILT SHAFT 2. If the steering wheel is mounted on the starboard side, insert the steering cable through the hole in the tilt tube on the starboard side and attach the cable with the steering cable nut.
Apply marine grease to the inner and outer cable before installation. 3. Install the sealed end cap to the tilt tube over the steering cable. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 318