Perkins — Page 1

N38143 Data Data - 700GM 1500 rev/min...........................1800 rev/min Basic Technical Data Prime power........................................ 27.2kW (36.5 hp).....................31.8kW (42.7 hp) Number of cylinders.................................................................4 Cylinder arrangement...........................................................In-line Cycle..................................................................................

4 stroke lnduction system........................................................Naturally Aspirated Bore................................................................................97mm (3.82”) Stroke............................................................................100mm (3.94”) Compression ratio................................................................17.5:1 Cubic capacity.............................................................3.0 litres (183in3) Valves per cylinder...................................................................2 Direction of rotation........................................Anti-clockwise viewed on flywheel Firing order.........................................................................1, 3, 4, 2 Total weight (wet)......................

282kg (622 lbs) engine only including starter and generator. Cooling System The coolant shown below is mandatory for use in all climates to ensure that adequate levels of corrosion inhibitor are present. It will give frost protection to -37oC. (-34.6oF) Coolant..............50% inhibited ethylene glycol or 50% inhibited propylene glycol with 50% fresh clean water Fresh water flow .......................... 80 l/min (21 US galls/min)......97 l/min (25.6 US galls/min) Coolant pump speed and method of drive.............

1.25:1 ratio, belt driven System capacity....................................................8.75 litres (2.31 US galls) Pressure cap setting...................................................... 50kPa (7 psi) Protection switch setting................................................96 O C (205 O F) Sea water pump type........................ Jabsco gear driven model 19mm (0.75”) 3/4 cam. Sea water suggested inlet hose diameter......................32mm (1.25”) Sea cock....................................... Full flow 25.4mm (1.00”) max lift of seawater pump 2m ...................................................

Full flow 38.1mm (1.25”) max lift of seawater pump 4m Strainer.............................. A raw water strainer must be included in the suction side of the circuit. Maximum sea water temperature...................................38 O C (100 O F) Sea water flow...................................................... 53 l/min (14 US galls/min) 69 l/min (18 US galls/min) Fuel System Recommended fuel specifications.........BS2869 Class A2 ASTM D 975 Number 2D. Cetane number.............................................................. 45 minimum.

Fuel injection pump.............................Zexel PTR, inline pump with electronic governor Fuel lift pump.......................................FCM type XY - lever operated diaphragm pump Pressure............................................................ 42 - 70 kPa (6.1 - 10.2 Ibf/in 2 ) Governor type...................................................................Electronic Page 71