N38143 Data Data - 4.4TW2GM 1500 rev/min...........................1800 rev/min Basic Technical Data Prime power....................................... 93.4kW (125.3 hp)................... 106.8kW (143 hp) Number of cylinders.................................................................4 Cylinder arrangement...........................................................In-line Cycle..................................................................................
4 stroke lnduction system..................................................Turbocharged/Aftercooled Bore..............................................................................100mm (3.937”) Stroke............................................................................127mm (5.00”) Compression ratio................................................................19.3:1 Cubic capacity...........................................................
3.99 litres (243 in3) Valves per cylinder...................................................................2 Direction of rotation........................................Anti-clockwise viewed on flywheel Firing order.........................................................................1, 3, 4, 2 Total weight (wet)......................522kg (1151 lbs) engine only including starter and generator. Cooling System The coolant shown below is mandatory for use in all climates to ensure that adequate levels of corrosion inhibitor are present. It will give frost protection to -37 O C (-34.6 O F).
Coolant..............50% inhibited ethylene glycol or 50% inhibited propylene glycol with 50% fresh clean water Fresh water flow ........................145 l/min (37.3 US galls/min)...171 l/min (45.2 US galls/min) Coolant pump speed and method of drive................... 1:1 Gear driven System capacity.....................................................16.5 litres (4.8 US galls) Pressure cap setting...................................................... 50kPa (7 psi) Protection switch setting................................................96 O C (205 O F) Sea water pump type..........................Jabsco gear driven model 25.4mm (1”) full cam.
Sea water suggested inlet hose diameter......................32mm (1.25”) Sea cock....................................... Full flow 25.4mm (1.00”) max lift of seawater pump 2m ................................................... Full flow 38.1mm (1.25”) max lift of seawater pump 4m Strainer.............................. A raw water strainer must be included in the suction side of the circuit. Maximum sea water temperature...................................38 O C (100 O F) Sea water flow.............................86 l/min (22.7 US galls/min)....102 l/min (26.9 US galls/min) Fuel System Recommended fuel specifications.........BS2869 Class A2 ASTM D 975 Number 2D.
Cetane number...............................................................45 minimum Fuel injection pump.........................................................Delphi rotary Fuel lift pump.......................................................................Electric Delivery............................................. 120-150l/hr (31.7 US galls/hr to 39.6 US galls/hr) Pressure................................................................ 30-75kPa (4.4-10.9 PSI) Governor type..................................................................Mechanical Page 83