Komatsu — 500 HOUR INSPECTION CHECKS

Lubrication & Service - Section 40 OM4066 Page 40-2 500 HOUR INSPECTION CHECKS EVERY 500 HOUR INSPECTION Item Task Engine Side Panels Inspect panels for damage and repair or replace where necessary. Inspect door seals for damage or misalignment and repair or replace where necessary. Inspect the acoustic insulation and perforated steel covers for damage or soil build- up and repair or replace where necessary. The acoustic insulation should completely fill the void and be free of mud and excessive dust build-up. It should be soft and of consistent density. Replace if necessary. Inspect door hinges and latches for damage and repair or replace where necessary. Lubricate when required.

Inspect attenuator splitters for damage or excessive soiling and repair or replace when necessary. Engine Belly Pan Inspect all panels for damage and repair or replace where necessary. Inspect hinges, latches, and grab handles for damage. Repair or replaces where necessary. Inspect seals for damage or misalignment. Repair or replace where necessary. Inspect the acoustic insulation and perforated steel covers for damage or soil build- up and repair or replace where necessary. The acoustic insulation should completely fill the void and be free of mud and excessive dust build-up. It should be soft and of consistent density. Replace if necessary. Inspect the protective sheathing for damage.

If the protective sheathing has been ripped, torn or is otherwise damaged, it should be replaced. Radiator Silencer Inspect radiator attenuator for excess amounts debris, oil, or grease. Remove debris as required. Wipe oil or grease off with a clean rag as soon as practical. Rear Engine Compart- ment Enclosure Inspect panels for damage and repair or replace where necessary. Inspect rubber flaps and seals for damage or misalignment, repair or replace where required. Inspect the insulation and perforated steel covers for damage or soil build-up and repair or replace where necessary. The acoustic insulation should completely fill the void and be free of mud and excessive dust build-up.

It should be soft and of consistent density. Replace if necessary. Front Panel Assembly Below Radiator Attenuator Inspect panels for damage. Inspect the insulation and perforated steel covers for damage or soil build-up and repair or replace where necessary. The acoustic insulation should completely fill the void and be free of mud excessive dust build-up. It should be soft and of consistent density. Replace if necessary. Hood Seals Inspect panels for damage and repair or replace where necessary. Inspect seals for damage or misalignment and repair or replace where necessary.

Inspect the acoustic insulation and perforated steel covers for damage or soil build- up and repair or replace where necessary. The acoustic insulation should completely fill the void and be free of mud and excessive dust build-up. It should be soft and of consistent density. Replace if necessary.