Komatsu — EVERY 500 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL PREFILTER CARTRIDGE WARNING Container to catch the fuel Prepare a filter wrench (2) installed to the bottom of filter turn filter cartridge (1) sure to replace the O-ring 4 - 58 I mmediately after the engine i eplacing the filter. s stopped, all parts are still very hot. Accordingly, wait until they have cooled down before ide the engine fuel piping system when the engine is running. r H igh pressure is generated ins r When replacing the filter, wait for at least 30 seconds after stopping the engine to let the intern al pressure go down before eplacing the filter. lose.

D o not bring any fire or flame c NOTICE Genuine Komatsu fuel filter ca rtridges use a special filter that has highly efficient filtering abilit y. When replacing the filter c artridge, always use a genuin e Komatsu part. T he common rail fuel injection system used on this machine consists of more precise parts than the conventional injection p I s ump and nozzle. f any part other than a genuine Komatsu filter cartridge is used, dust or dirt may get in and cause problems with the injection ystem. Always avoid using su bstitute parts. When performing inspection or maintenance of the fuel system, pay more attention than normal to the entry of dirt.

If dirt is s tuck to any part, use fuel to w ash it off completely. 1. Place a container under th fuel. Turn water separator cup cartridge (1) to the left and 2. 3. By using a filter wr counterclockwise to remov 4. Install cup (2) removed bef prefilter cartridge. (At this with new one.) Tightening torque of cu 5. Clean the filter holder. NOTICE When filling the filter cartridge wit cap (A) fitted. Cap (A) acts to prevent the entry o 6. Fill the filter cartridge with 7. (B) in the new filter cartrid Coat the packing surface 8. Remove filter cartridge ca