Komatsu — CHANGE THE HYDRAULIC OIL FILTER

MAINTENANCE 4. Using a 13 mm wrench, remove the filter casing (7). 5. Carefully clean filter casing (7), making sure that filter gasket (8), and casing gasket (9) are in perfect condition. 6. Clean the magnetic rings (10) on the cover. 7. Change the cartridge (6). 8. Reassemble unit by proceeding in the reverse order. Make sure that the cover (5) and gasket (11) are in perfect condition and is posi- tioned in the cover seat. 9. Reinstall the upper platform (1) and secure it with the screws (2). # Hydraulic oil deteriorates more rapidly when machines use demoli- tion hammers compared to digging operations. On new machines, replace the filter after the first 100 to 150 hours of operation.

And for successive replacements, follow the schedule on replacement interval table. # If the machine uses HEES, replace the filter after the first 50 hours of operation. WB140PS-2N WB150PS-2N 3-49