Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY SWING MACHINERY 12 14. Using push tool B , remove cover (27) and bearing (31) from shaft (32). Remove oil seal (33) from cover (27). 15. Using push tool, remove bearing (34) from case (35). ASSEMBLY G Clean all parts, and check for dirt or damage. Coat the sliding sur- faces of all parts with engine oil before installing. 1. Using push tool C , press fit bearing (31) to case (35). 2. Using push tool D , press fit oil seal (33) to cover (27). Outside girth of oil seal...........................Gasket sealant [LG-6] # Be careful not to let the gasket sealant [LG-6] get on the oil seal lip when press fitting. 30-16 PC300LL-6