hyundai R60WVS Pro — 7. AXLE

21 Unloose the nuts and screw them onto the ball-and-socket joints. 22 Hold the articulations still and rotate the ball-and-socket joints. Once the convergency has been adjusted, lock the nuts. · Torque wrench setting for nuts : 24.5~27.5 kgf · m (177~199 lbf · ft ) ADJUSTING THE STEERING ANGLE ADJUSTING THE STEERING ANGLE Perform the same operations on both sides (see diagram). Loosen the nut of one of the adjusting screws on cylinder side. Steering cylinder 23 Adjust the jutting portion of the screw according to data shown in the table (see the next page). Lock into the position with nut tightened to max 15.1 kgf · m (109 lbf · ft ). 7-132