hyundai R60WVS Pro — 7. AXLE

⑨ Remove the comparator and take out tool and bearing kits from the main body. Reinstall every part, also introducing a distance piece between bearings (4) and (14). Tighten the entire pack by hand. ⑩ Assemble on top of the tool T8 and between the two bearings the shim (5) and the largest calibrated shim (9). Measur the difference H using a dial gauge DDG. ⑪ ⑫ Calculate the shim S2 to be inserted. E.g. S2 = H + X = 3.01 mm where X = fixed value to obtain = 0.07~0.08 mm 7-234