⑬ Fit the pinion (11), shim “S1” (10) and distance piece (5), (9) in the main body (12). The finer shims must be placed in- between the thicker ones. ⑭ Heat the external bearing (14) to a tem- perature of about 100˚C and fit it on to the pinion (11) so as to complete the pack as shown in the figure. Lightly lubricate bearing with SAE85W90 oil. ⑮ Insert the spacer (8A). Check the using of the friction washers. 16 Install the flange (2) onto the pinion (11) without sealing ring. 7-235