TESTING AND ADJUSTMENTS CONTROL AND REGULATION OF THE PRESSURES IN THE HYDRAULIC CIRCUITS CONTROL AND REGULATION OF THE PRESSURES IN THE HYDRAULIC CIRCUITS # Test conditions: Engine: at working temperature. MIN andMAX.enginespeeds:withinpermissible limits. Oil temperature: 45 55 °C. cuits (see «ELIMINATION OF THE RESIDUAL PRESSURES IN THE CIRCUITS AND IN THE TANK») and place the safety engagement levers into their locked positions. After having connected the pressure gauges, pres- surise the tank. For details, see «PRESSURISATION OF THE TANK». Before removing the plugs in order to measure the pressures, release the residual pressures in the cir- L.H.
TRAVEL MOTOR ENGINE P1 P2 P3 P4 P5 CONTROL VALVE R.H. TRAVEL MOTOR RKS01291 The control valve consists of the spools that command: 2 3 B A 1 RKS01130 20-26 SK714-5 SK815-5 Command Ports Arm (Lower - Raise) Bucket (Dump - Curled) A1 - B1 A2 - B2 Equipment (R.H. - L.H.) A3 - B3